EDIAG YA101 OBDII Scanner For OBD II Engine Upgrade online
YA101 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
1. YA101 Diagnostic Function
Use this function to select a vehicle and then proceed to the Diagnostic Menu.
Read Codes : Reads DTCs from vehicle's computer with KOEO or KOER.
Erase Codes: Deletes DTCs from vehicle's memory.
Live Data: Live Data menu lets you view, record and playback real time PIDs data fromthe electronic control module. In live data menu, you can insert the selected item to front by holdingpressing the key for 3 seconds.
Freeze Frame: Displays a snapshot of operating conditions at the time of a fault.
Vehicle Info: Scan tool displays the vehicle's VIN number, Calibration ID (s) and CVNthat identify the software version in the vehicles control module (s.)The tool also displays In-Use Performance Tracking of importantreadiness monitors.
Component Test: Tool will display a list of components and their locations on the vehicle.This function will always appear on the Main Menu .This selection will appear on the Diagnostic Menu only when the toollhas a list of component locations for the currently selected vehicle.
On-Board Monitoring: Scan tool controls the operation of vehicle components, tests or systems.
O2 Sensor Test: Displays oxygen sensor monitoring test results from the vehicle's memory,the O2 Monitor Test is NOT an ON-DEMAND TEST.
I/M Readiness: Displays a snapshot of the state of the vehicle's OBDII Monitors.
* To review I/M Readiness status,make sure that the ignition key is switched
to ON with the engine off.
* Not all monitors are supported by all vehicles.There are two types of l/M Readiness tests:
* since DTCs Cleared -shows status of the monitors since the DTCs werelast cleared.
* This Drive Cycle-shows status of monitors since the start of the currentdrive cycle.
2 .DTC Look Up
Looks up definitions of DTCs stored in scan tool, and shows the possible causes of the DTC. (NOT every DTC with possible causes reason)
3. Voltage Test
This function is used to monitor the voltage present on pin 16 of the OBDIIData Link Connector.
Changes tool option displays tool information, and performs tool self-tests.
Languages: Allows the user to change the language used by the tool. Including, English,chinese,France,Deutsch,Italian ,Japanese,Espanish,Russian,Portuguese
Data Logging: Turn on /off the data log function to record the device data through vehicle.
Self-test : Display Test. Used to check the display screen. Keyboard Test. Verifies that the keys are working correctly.
Display the device hardware information , software information , releasedate and serial number, etc.
What can YA101 do ?1.Turn Off ''Check Engine'' Light