Elm327 Ediag P01 OBD2 Scanner 16-Pin Bluetooth Adapter  Obdii Test

Elm 327 EDIAG P01 OBD2 16-pin Bluetooth Adapter OBDII Diagnostic Scanner 


Why choose our products? 
1. All products in our company are 100% original EDIGA products.
2. The lowest price in whole Made-in-China.
3.Overseas warehouse: Fast shipping & Seller paying customs tax for EU countries.
4.Countries with local free return: United States, Canada, Australia, United Kingdom, France, Spain, Germany, Russia, Brazil, Israel, South Korea, Saudi Arabia, UAE, Poland, Netherlands, Italy. ( Note: If products are blamed of any quality problem, free return service to local country will be open. )
 

Product Introduction:
    EDIAG P01 is a kind of wireless smart solution of auto diagnosis, which supports all 10 modes of OBDII test. It is a 16-pin DLC ( Data Link Connector ) that must be connected to the OBDII interface when it works. It supports almost every OBDII protocol. And it features Bluetooth connection, no Batteries, Cables or Switches.
    Its function scope covers wireless (Bluetooth) 5~ 10 meters.
    It supports retrieve fault codes (DTC) and check engine.
    It can also be used with a PC or with a Bluetooth Card.
    SKU:YHP01-B
 

Features:
1.  Low price but good quality
2.  Designed for individual car owners
3.  Plug and play, Bluetooth connection communication
4.  Support American car after 2000, European car after 2003, Japanese car after 2008
5.  Multiple languages : those that your PC or Android-based smart phone can support
 

Functions :
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

 

 

 

OBDII functions on Engine Check:  
-Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTC).
-Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
-Read Live Data Stream: Show the information of continuous ECU/PCM data stream from a vehicle in live graphic (waveform) display.
-View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

  

Vehicle Coverage:
Support Car Models for OBDII diagnostic functions on most of OBDII Vehicles
(Note: EDIAG P03 only Support 12V Gasoline/petrol cars, Does not support 24V Diesel vehicle or Truck )
 

  American Car :
  Need Standard OBD2 Protocols from 2000 to now
  for Chrysler , for Ford, for GM, For Jeep ...

   

  European Car :
  Need Standard OBD2 Protocols from 2003 to now
  For Alfa romeo , for SAAB ,for Acura , for Opel , for Audi for Seat , for Peugeot , for Renault
  For Bentley , for Skoda , for Daewoo , for Benz , for Daihatsu , for Land Rover , for BMW ,
  for Vauxhall , for Citroen , for Volvo , for Fiat , for VW , for Ford , for Jaguar...  

   

  Japanese/Korean Car:
  Need Standard OBD2 Protocols from 2006 to now
  for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda,
  for Nissan, for Subaru , for Suzuki, for Toyota.. 

 

Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep;
Fit for Alfa Romeo, Fit for SAAB, Fit for Acura, Fit for Opel, Fit for Audi, Fit for Seat, Fit for Peugeot ,Fit for Renault, Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu, Fit for Land Rover, Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar; 
Fit for KIA , Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai  ,Fit for Dacia  ,Fit for Lexus ,Fit for Mazda, Fit for Nissan, Fit for Subaru , Fit for Suzuki, Fit for Toyota;......
 
*For Ssangyong car makes, please don't purchase If your car is before 2008. 
*For Renault Dacia Logan car model, please don't purchase If your car is before 2009.
 
If your vehicle does not fall into any of the above categories, look under the hood and try to locate a label that explicitly states that the vehicle was designed to comply with OBD-2 legislation.

Support 9 Kinds of OBDII protocols
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
A.SAE J1939 CAN(29bit ID,250*Kbaud)
B.USER1 CAN(11*bit ID,125*Kbaud)
C.USER2 CAN(11*bit ID,50*kbaud)
*default settings(user adjustable)
 

Display current sensor data, including :
1.Engine RPM
2.Calculated Load Value
3.Coolant Temperature
4.Fuel System Status
5.Vehicle Speed
6.Short Term Fuel Trim
7.Long Term Fuel Trim
8.Intake Manifold Pressure
9.Timing Advance
10.Intake Air Temperature
11.Air Flow Rate
12.Absolute Throttle Position
13.Oxygen sensor voltages/associated short term fuel trims
14.Fuel System status
15.Fuel Pressure

Warm Tips :

EDIAG P01 Supports Bluetooth v3.0,and can be connected with PC/Android phone via bluetooth.
It CAN NOT work on IOS. 

It is V1.5 and supports J1850 protocols.
It is with pic18f25k80 chip.
It understand commands such as ATPPS and other. 
And for program,we suggest to use Torque. 

This hardware can match much other software still, but most of them are not free.
Works for Windows98/ME/2000/XP/Vista & Windows7.
This tool does not match abs and airbag system.

*This one can't support Diesel vechicles.
*Can do most of OBDII gasoline cars,but can't support all OBDII cars.
*Ediag P01 can do MOST of the OBDII vehicles, but it CAN NOT do all models.
 

How to connect with the Phone and Software? 

1.Android phone system requirement: Android 4.0-4.4 or higher 

2.Software Installation: After insertion of ELM327 Install APP:Install---Continuous click "Next" continue the next installation---Click "Done" Install software

3.Connect Bluetooth:
1)Turn on the Bluetooth switch
2)Find "OBDII" and connect it,the password is: 1234 or 0000
3)Enter the Torque,and set the connection way:Bluetooth,then Choose Bluetooth Device: OBDII

Connection Failure selfcheck on phone : 
1.Car is not supported.
2.Engine is not ignited.
3.You need confirm the connection way as below.
Click Menu button setting bluetooth Connection:
Exit Torque,and re-run the software.Successful connection.

Packing List :
EDIAG P01 16-PIN Bluetooth Adapter  * 1
User Mmanual  * 1
Overseas Warehouses in EU, US, Brazil, Russia, Australia, etc
Fast Shipping Service & Seller Paying Customs Tax